Firstop Group Co. Limited
Navigator of China plastic film extruder. Navigator of China EPE Extrusion Line. Trustworthy since 1999.
Add to Cart
JYD150 PE Foam Sheet Extrusion Line At Closed Mini Cell Lower density
JYD150 PE Foam Sheet Extrusion Line is a medium sized model.
Shenzhen JYD Industry is a pioneer grade ODM specialist. We focus on.
Well known and welcomed for top foaming quality: Comparatively speaking, lowest density, smaller mini cell, better elasticity and nicer appearance.
* Both direct butane or LPG may be the foaming gas. Our machine is sensitive enough for LPG foaming.
* Min. density 15 kg/m3 with very good hardness.
* New improvement: Hydraulic screen exchanger's both sides with heaters. Therefore screen holder's hole cleaning is much easier.
| Technical parameter | |
| Model No. | JYD150 |
| Screw Diameter | 150 mm |
| Screw L/Dia | 52:1 |
| Production | 250 - 400 kg/hr, 10 - 80 mpm |
| Product Thickness | 2-15mm |
| Product Width | 1600-600 mm |
| Foaming Times | 20-55 |
| Density | 15.5-95 kg/m3 |
| Cooling | Air cool + Water cool |
| Installed power | abt.230 kw |
| Power supply | 100 kw, 380VAC, 50 hz or as required |
| Screw RPM | 20-80 |
| Dimensions (L/W/H) | 30,000 x 2800x2200 mm |
| Net weight | 14T |
| 1. Platform / ladder, 1 set | Q235A |
| 2. Material Mixer, 1 set. | Volume: 250kg |
| Shape: round | |
| Material: Q235A | |
| Drive motor: 2 hp x 4P x 1 | |
| 3. Auto loader, 1 set. | By Shenzhen Taiqiang, 1 set. With alarm. |
| 4. Additive extruder, 1 set |
Single extruder, D35 mm x 200 mm long Feeding method: directly into the barrel neck Decelerate AC motor: 1.5 kw, 1/43. 1 set. V. F. drive, 1.5 kw. 1 set |
| 5. Extruder, 1 set. |
Gearbox: by Changzhou, China. Stepless spiral gear. 40Cr gear. |
|
Main motor: 132 KW x4P, by Anhui Liu’an. +V.F. drive, by Shenzhen Winner |
|
|
Neck unit: stainless steel plate. Water cool coupling type. |
|
|
Barrel: ID150 x OD 230 mm. 52:1. 38CrALA + nitride. By Zhejiang Zhousan. With 18 cast alu ring heater + tap water cooling. |
|
|
Screw: D150 mm. 52:1. 38CrALA+ nitride. Hardness: 75 Rockwell. Compress ratio: 3:1. 0-80 rpm. By Zhejiang Zhousan. |
|
| 6. Gas (butane/ LPG) pump, 1 set |
By Zijiang, Hangzhou. Pump type: high pressure volumetric, with 3 pistons + V. F. drive. Output pressure: Max. 300 MPA Output qty adjustment: by piston stroke. Pressure gauge: 0 - 500 MPA Stroke control: scale hand wheel Drive motor: 4.0 kw x 4P + V. F. drive. |
| 7. GMS pump, 1 set |
Anti shrinkage type, M-1, mono glyceride melt pot volume: 5 - 7L |
| 8. Extruder head, 1 set |
Mould, of 45 steel. 3 pcs. Heating method: ring heater Melt temperature, 1 zone T/M melt pressure gauge: 40 MPA, 1 set Thickness control, by screw rpm and mould clearance Material: mould steel. Heating zone, 1 |
| 9. Auto Screen exchanger, 1 set |
Type: Hydraulic double-screen type With heaters to insure easy screen plate cleaning. |
| 10. Air ring, 1 set |
Material: cast alu Fan motor: 1.5 kw x2 |
| 11. Mandrel, 3 pcs |
Cooling method: air cool + water cool Slit method: Electric driving round cutter |
| 12. Open-flat unit, 3 pcs |
1 arch type and 2 frame type Material: Q235A |
| 13. Static electricity eliminator, 2 pcs | Type: ion fan |
| 14. Haul station, 1 pcs |
Roller sizes: D420 x 1,700 mm x 2 pcs Material: No. 20 steel pipe + chromeplate Transmission motor: 5HP x 4P, adjustable Open roller sizes: D182 x 1,800 mm |
| 15. Winding turret, 1 set |
Type, turret Max. Winding weight: 40 kg x 1m in diameter Max. Tension value: 15 kg Transmission motor: Speed adjustable. Torque motor of 100 kg/cm3 x 2 pcs. Length control: length meter + alarm CCW motor: 1HP x 1/10 gear retarder motor |
| 16. Control system |
Temperature control zone: 8 for extruder and 1 for the head, PID. Motor control: main inverter cabinet, 1 pcs Main cabinet, 1 pcs. Haul/ turret cabinet: 1 pcs |