Firstop Group Co. Limited
Navigator of China plastic film extruder. Navigator of China EPE Extrusion Line. Trustworthy since 1999.
Add to Cart
JYD220 PE Foam Sheet Extruder Lower Density at closed mini cell. Most welcomed model !!!
JYD220 PE Foam Sheet Extrusion Line is our best seller.
Shenzhen JYD Industry is a pioneer grade ODM specialist. We focus on.
Well known and welcomed for top foaming quality: Comparatively speaking, lowest density, smaller mini cell, better elasticity and nicer appearance.
* Both direct butane or LPG may be the foaming gas. Our machine is sensitive enough for LPG foaming.
* Min. density 13.1 kg/m3 with very good hardness.
* New improvement: Hydraulic screen exchanger's both sides with heaters. Therefore screen holder's hole cleaning is much easier.
| Technical parameter | |
| Model No. | JYD220 |
| Screw Diameter | 220 mm |
| Screw L/Dia | 55:1 |
| Production | 450 - 750 kg/hr |
| Product Thickness | 5-22mm |
| Product Width | 3000- 900mm |
| Foaming Times | 55 |
| Density | 13.1-95 kg/m3. Optimal: 15.5 at closed cell. |
| Cooling | Air cool + Water cool |
| Installed power | abt.460 kw |
| Power supply | 250 kw, 380VAC, 50 hz or as required |
| Screw RPM | 20-80 |
| Dimensions (L/W/H) | 45000 x 3000x2800 mm |
| Net weight | 25T |
| Shipping | Flat rack. 45 HQ is too short. |
| 1. Platform / ladder, 1 set | Q235A |
| 2. Material Mixer, 1 set. | Volume: 500 kg |
| Shape: round | |
| Material: Q235A | |
| Drive motor: 3 hp x 4P x 1 | |
| 3. Auto loader, 1 set. | By Shenzhen Taiqiang, 30L, 1 set. With alarm. |
| 4. Additive extruder, 1 set |
Single extruder, D35 mm x 200 mm long Feeding method: directly into the barrel neck Decelerate AC motor: 1.5 kw, 1/43. 1 set. V. F. drive, 1.5 kw. 1 set |
| 5. Extruder, 1 set. |
Gearbox: by Changzhou, China. Model 500. Stepless spiral gear. 40Cr gear. |
|
Main motor: 250 KW frequency conversion motor, by Anhui Liu’an. V.F. drive, by Shenzhen Winner |
|
|
Neck unit: stainless steel plate. Water cool coupling type. |
|
|
Barrel diameter: ID220 x OD300 mm. 55:1. 38CrALA + nitride. By Zhejiang Zhousan. With 15 cast alu ring heater + tap water cooling. |
|
|
Screw: D220 mm. 55:1. 38CrALA+ nitride. Hardness: 75 Rockwell. Compress ratio: 3:1. 0-80 rpm. By Zhejiang Zhousan. |
|
| 6. Gas (butane/ LPG) pump, 1 set |
By Zijiang, Hangzhou. Pump type: high pressure volumetric, with 3 pistons + V. F. drive. Output pressure: Max. 300 MPA Output qty adjustment: by piston stroke. Pressure gauge: 0 - 500 MPA Stroke control: scale hand wheel Drive motor: 5.5 kw x 4P + V. F. drive. |
| 7. GMS pump, 1 set |
Anti shrinkage type, M-1, mono glyceride melt pot volume: 5 - 7L |
| 8. Extruder head, 1 set |
Mould, of 45 steel. 3 pcs. Heating method: ring heater Melt temperature, 1 zone T/M melt pressure gauge: 40 MPA, 1 set Thickness control, by screw rpm and mould clearance Material: mould steel. Heating zone, 1 |
| 9. Auto Screen exchanger, 1 set |
Type: Hydraulic double-screen type With heaters to insure easy screen plate cleaning. |
| 10. Air ring, 1 set |
Material: cast alu Fan motor: 2.2 kw |
| 11. Mandrel, 3 pcs |
Cooling method: air cool + water cool Slit method: Electric driving round cutter |
| 12. Open-flat unit, 3 pcs |
1 arch type and 2 frame type Material: Q235A |
| 13. Static electricity eliminator, 2 pcs | Type: ion fan |
| 14. Haul station, 1 pcs |
Roller sizes: D420 x 3200 mm x 2 pcs Material: No. 20 steel pipe + chromeplate Transmission motor: 5HP x 4P, adjustable Open roller sizes: D182 x 3200 mm |
| 15. Winding turret, 1 set |
Type, turret Max. Winding weight: 40 kg x 1m in diameter Max. Tension value: 15 kg Transmission motor: Speed adjustable. Torque motor of 160 kg/cm3 x 2 pcs. Length control: length meter + alarm CCW motor: 1HP x 1/10 gear retarder motor |
| 16. Control system |
Temperature control zone: 19 for extruder and 3 for the head. PID. Motor control: main motor cabinet Haul/ turret: 1 cabinet |